BASE PLATES
CENTRAL UNITS are the effective and competitive solution for those companies that cannot stop their activity and need a backup compressor in times of need, such as in the event of a breakdown or maintenance of the main compressor.
Characteristic
- CAST CYLINDER with superior hardness that prolongs its useful life and performance.
- Widely dimensioned FINS for greater cooling.
- CRANKSHAFT made of double-supported cast iron for greater stability
and dynamically balanced. - VALVE PLATE made of stainless steel reeds, with greater
resistance to temperatures and corrosion, and provide a higher flow rate. - One piece stamped CONNECTING RODS, mounted on bearings
of needles that guarantee less friction, greater performance
and less vibrations. - CRANKCASE made of injected aluminum for better thermal evacuation.
- NEW: Injected aluminum pulleys with Double Wind Geometry-NACA profile that provide a 25% increase in head cooling.
- ELECTRIC MOTOR with low consumption, high efficiency IE3 and S1 service.
- Thermal PRESSURE SWITCH (only three-phase models with direct start).
- PLUG & PLAY, very simple installation, plug and play (incorporated PRESSURE CONTROL TUBE).
Availability of special dust filters (quarries, cement, etc.).
Consult price according to model.
Compressors whose maximum pressure is 10 bar are factory-regulated at a standard pressure of 7 bar minimum and 9 bar maximum. Those of 15 bar are regulated from 10 to 12 bar.
+ Information
Code | Model | HP | Kw | Liters | Ph | Bar | R.p.m. | L/m | m3/h | db | Length | Width | Tall | Kg | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5084000 | CENTRAL-2M | 2 | 1,5 | 1 | 1 | 10 | 920 | 310 | 18,6 | 10 | 620 | 340 | 400 | 35 | |
5095001 | CENTRAL-3M | 3 | 2,2 | 1 | 1 | 10 | 920 | 400 | 24 | 10 | 620 | 400 | 410 | 45 | |
5184001 | CENTRAL-2 | 2 | 1,5 | 3 | 3 | 10 | 1135 | 310 | 18,6 | 10 | 620 | 340 | 400 | 35 | |
5195001 | CENTRAL-3 | 3 | 2,2 | 3 | 3 | 10/15 | 1135 | 400 | 24 | 10/15 | 620 | 400 | 410 | 45 | |
5205001 | CENTRAL-4 | 4 | 3 | 3 | 3 | 10/15 | 910 | 590 | 35,4 | 10/15 | 820 | 480 | 550 | 77 | |
5215001 | CENTRAL-5,5 | 5,5 | 4 | 3 | 3 | 10/15 | 1085 | 780 | 46,8 | 10/15 | 820 | 480 | 550 | 80 | |
5225001 | CENTRAL-7,5 | 7,5 | 5,5 | 3 | 3 | 10/15 | 795 | 1010 | 60,6 | 10/15 | 1020 | 570 | 740 | 142 | |
5225005 | CENTRAL-7,5/A* | 7,5 | 5,5 | 3 | 3 | 10/15 | 795 | 1010 | 60,6 | 10/15 | 1020 | 640 | 740 | 150 | |
5235001 | CENTRAL-10 | 10 | 7,5 | 3 | 3 | 10/15 | 1125 | 1400 | 84 | 10/15 | 1020 | 570 | 740 | 150 | |
5235005 | CENTRAL-10/A* | 10 | 7,5 | 3 | 3 | 10/15 | 1125 | 1400 | 84 | 10/15 | 1020 | 640 | 740 | 158 | |
5255005 | CENTRAL-15/A* | 15 | 11 | 3 | 3 | 10/15 | 840 | 2020 | 121,5 | 10/15 | 1110 | 740 | 780 | 220 | |
5265005 | CENTRAL-20/A* | 20 | 15 | 3 | 3 | 10/15 | 1125 | 2770 | 166,2 | 10/15 | 1110 | 740 | 780 | 231 |
Do you need advice?
We are at your disposal for any information you need. Our technical department will be happy to advise you on your project.